The design of the BM4010 roller brake tester is unique as it allows for split bed installation over an inspection pit.
This brake tester features a large range of options that allows for a customized configuration.
OPTIONS
The BM4010 roller brake tester is approved by several international authorities.
See also other BM brake testers for light vehicles: BM3010, BM5010, BM7010 and BM9010.
Advantages
- IT system using latest app technology for smartphone and tablet (Windows and Android).
- Split bed roller set makes it possible to install over an inspection pit.
- The display can be mounted either on the wall, saving floor space, or on floor column devices, that are designed so equipment is protected even when floor is cleaned with chemicals. It can also be mounted on a trolley making it easy to move around.
- Completely flush-floor. When roller cover plates are placed on top of the roller bed, the BM4010 becomes one with the workshop floor making it easy to drive over it from any angle.
Installation
- Hot galvanized subframes can be concreted into the ground before the actual brake tester is installed.
- The subframes ensures easier planning and implementation of installation as well as correct alignment of the brake tester during concreting.
- Can be installed both indoor and outdoor in most environments from -30ºC to 60°C and humidity up to 95.
- Fitting adaptor plates are available if subframe is not required.
Applications
- Normal workshops performing repair of any light vehicles.
- Vehicle inspection bodies.
Downloads
BM4010 brochure EN (PDF)
BM40A Universal Vehicle Inspection Lane brochure EN (PDF)
BM40A Universal Vehicle Inspection Lane brochure DE (PDF)
Videos
Product Short Description :
Strong flush-floor in-ground brake tester for light vehicles with axle loads up to 4000 kg.
Additional Information:
- Roller bed (600 mm rollers) LxWxH: 2300 x 715 x 250 mm
- Roller bed (750 mm rollers) LxWxH: 2530 x 715 x 250 mm
- Roller bed (1000 mm rollers) LxWxH: 3030 x 715 x 250 mm
- Roller diameter: 182 mm, 204 mm
- Roller length: 600 mm, 750 mm, 1000 mm
- Friction coefficient of roller from factory dry/wet: Min. 0.8/0.7
- Wheel span: 880/800/800 to 2080/2300/2800 mm
- Distance between roller centres: 354 mm
- Maximum test axle weight: 3500 kg, 4000 kg
- Gear motor size: 2.2 kW, 3.8 kW
- Max. brake force measurement: 625 daN, 1250 daN
- Test speed: 2.5 km/h, 5.0 km/h
- Display (LxWxH): 735 x 500 x 140 mm
- Display brake force scale: 0 – 620 daN
- Brake force measuring accuracy: 0 – 100 daN: +/- 1 daN, > 100 daN: +/- 1% FS
- Weight measuring accuracy: 0-100 kg: +/-2 kg, >100 kg: +/-2% FS
- Pedal force measuring accuracy: 0 – 100 daN: +/-1 daN
- Power and fuses: 3 x 400 Vac + N + PE, Min. 13/20 Amp, 3 x 230 Vac + PE, Min. 20/35 Amp
Product Gallery:
