The design of the BM7010 & BM7110 roller brake tester is unique as it allows for split bed installation over an inspection pit.
This brake tester features a large range of options that allows for a customized configuration.
OPTIONS
The BM7010 & BM7110 roller brake tester is approved by several international authorities i.e. RWTÜV Germany.
See also other BM brake tester for light vehicles: BM3010, BM4010, BM5010 and BM9010.
Advantages
- IT system using latest app technology for smartphone and tablet (Windows and Android).
- Split bed roller set makes it possible to install over an inspection pit.
- The display can be mounted either on the wall, saving floor space, or on floor column devices, that are designed so equipment is protected even when floor is cleaned with chemicals. It can also be mounted on a trolley making it easy to move around.
- Completely flush-floor. When roller cover plates are placed on top of the roller bed, the BM7010 becomes one with the workshop floor making it easy to drive over it from any angle.
Installation
- Hot galvanized subframes can be concreted into the ground before the actual brake tester is installed.
- The subframes ensures easier planning and implementation of installation as well as correct alignment of the brake tester during concreting.
- Can be installed both indoor and outdoor in most environments from -30ºC to 60°C and humidity up to 95.
- Special conversion subframes available to retrofit directly in to the recesses from other brake tester brands, i.e. Kismet, Crypton, Tecalemit.
Applications
- Normal workshops performing repair of any light vehicles.
- Vehicle inspection bodies.
- Caravan/trailer workshops. A special subframe is available allowing one roller bed to be slided sideways. The test wheel span can be increased or decreased to allow test on the sidest caravan or narrowest trailer.
Downloads
BM7010 brochure EN (PDF)
Product Short Description :
Strong in-ground brake tester for light vehicles with axle load up to 3500 kg.
Additional Information:
- Roller bed (LxWxH): 910 x 800 x 220 mm
- Subframe for split bed installation per side (LxWxH): 965 x 855 x 250 mm
- Roller length: 600 mm
- Roller diameter BM7010: 175mm
- Roller diameter BM7110: 182mm
- Friction coefficient of roller from factory dry/wet: Min. 0.8/0.7
- Wheel span: 880 to 2080 mm
- Distance between roller centres: 350 mm
- Maximum test axle weight: 3500 kg
- Maximum drive over axle weight: 4000 kg
- Gear motor size: 3.8 kW
- Max. brake force measurement: 750 daN
- Test speed: 4.5 km/h
- Display (LxWxH): 735 x 500 x 140 mm
- Display brake force scale: 0 – 620 daN
- Brake force measuring accuracy: 0 – 100 daN: +/- 1 daN, > 100 daN: +/- 1% FS
- Pedal force measuring accuracy: 0 – 100 daN: +/-1 daN
- Power and fuses: 3 x 400 Vac + N + PE, Min. 20 Amp, 3 x 230 Vac + PE, Min. 35 Amp
Product Gallery:
